Tying The Fishin Hole Blue Smelt - The Secret Recipe To One Of Our Best Fishing Flies

The fishin Hole Blue Smelt Recipe:wire.
Hooks- Mustad 3366 sz4Put extra wraps ahead of wire to make a
Tandem wire- Sevalon nylon coated wire 27#smooth transition - ramp from wire to hook shaft.
testWhip finish.
Thread- Rumpf prewaxed White 8/0With thin CA or superglue lightly cover wire, let
Tail & wing flash- Polar Flash #2002 or similardry thoroughly.
blue hue flashRe-start thread and wind to rear of leading hook.
Wing- White Bucktail, Blue Bucktail, 2-3 peacockBind in 4" of polydub, and 3" silver tinsel. Wind
herlthread forward to 1/8" or a little more behind
Body- White polydub, Medium smooth silver tinseleye. In smooth even wraps cover hook with
Instructions:polydub, then loose spiral tinsel and lock in place.
Clamp the eye of one hook in your vise of in aNext add in a sparse bunch of white bucktail that
pair of needlenose and gently bend the eye ofwill extend to or just past trailing hook.bind on
the trailing hook up to about a 30 to 40 degreeapprox 5-8 strands of polar flash.
angle.Lightly coat with thin head cement.
Measure out about 3 - 3.5 inches of wire and snipBind in sparse bunch of blue bucktail, then top with
with wirecutters. Feed wire in through trailing hookpeacock herl.
until it reaches just ahead of bend.Continue wrapping until a smooth even head is
Cover wire on top with many wraps of thread.formed whip finish with 5 twists. and head
Measure and tie in a polar flash tail.cement.
Whip finish.Paint head with white enamel, dry, then paint on
With thin CA or superglue lightly cover wire up tored dot on each side (eyes).
and including the hook eye, let dry thoroughly.Cast or troll this incredible fly for salmon or trout.
Start thread again and bring to rear of the hook ,Bass have also shown plenty of interest in this fly.
just ahead of tail. Tie in about 4 inches of whiteWe have found this fly to be especially effective
poly dub and silver tinsel. bring thread to eye.in Segago Lake here in Windham Maine where the
Wrap forward and bind in polydub then open spiralsmelts seem to have a slight purple or blue tinge
tinsel forward.in their color. Will most likely do well in any body
Whip finish.of water where game fish are hunting for Smelts.
Put leading hook into vise. Measure wire length andNOTE:
cut so that wire will end about 1/8 inch behindPlease do not reproduce this recipe or image
eye. With Trailing tandem held straight up andwithout permission or attaching credit to the Fishin'
behind wrap many times, the entire length ofHole where these Maine flies can be purchased.